Impact of Grain-Oriented Electrical Steel (GOES) Insulating Coating Thickness on Transformer Core Noise Levels

Nov 18, 2026 Leave a message

If a transformer hums louder than the specification allows, the cause usually traces back to the core steel, not the tank. Grain-oriented electrical steel changes shape slightly each time it is magnetized. Stack enough laminations and those small dimensional changes add up, and the structure radiates them as noise. Insulating coating thickness sits in the middle of this chain, and what it does is more mechanical than most people assume.

 

info-600-320

 

Take the coating's two jobs separately. The first is inter-lamination insulation, which keeps eddy currents in check. The second is less obvious. The coating is applied and cured under tension, and that tension pushes longitudinal stress into the steel surface. Surface stress reshapes the magnetic domain structure near the surface-fewer stray domains and fewer 90° domains, which are the ones that move most under alternating magnetization. Work published by the silicon steel group at Wuhan Iron and Steel found that both the forsterite base layer and the phosphate insulating coating reduce magnetostriction in grain-oriented steel, and that thicker coatings reduce the noisy domain population . So coating tension is not cosmetic; it changes how the steel behaves in a core.

 

That said, thickness has a working range, and stepping outside it causes problems. A patent covering grain-oriented steel for transformer cores sets film tension at 0.5 to 4.0 MPa, with 1.0 to 3.0 MPa as the preferred band. Under 0.5 MPa, the tension cannot hold against the clamping forces applied during core assembly, and the external stress that results makes magnetostriction worse instead of better. Over 4.0 MPa, the magnetostriction waveform turns irregular, and noise climbs as the steel contracts and stretches sharply near saturation . Where the window falls depends on grade, thickness, and clamping practice-there is no universal number.

 

1

 

For a grain-oriented electrical steel transformer core specification, coating weight belongs with the design parameters, not the purchasing checklist. Two coils that pass the same magnetic test can sound different once they are in a core if their coating tensions do not match. Hebei Hozee Electric Co., Ltd. produces laminated cores and single-phase wound cores in-house, so coating tension and stacking are aligned during production rather than caught later during noise testing. The company manufactures oil-immersed transformers, dry-type transformers, and single-phase transformers, with core steel bought to defined coating parameters. When grain-oriented electrical steel transformer core noise is written into a contract, the conversation has to start with the steel, not the finished tank.

 

 

Contact now